Maxima SE V6-3.5L (VQ35) (2002)
15.
Slide both of the seat rails back to the rear position (towards the seat back) and remove the worm gears, flexible wire, motor, and gear boxes, all as
one unit, from the seat adjuster assembly (see figure 7).
CAUTION:
Avoid bending the flexible wire. Bending the wire will result in a noise during seat operation.
16.
Remove the flexible wire from the gear boxes. To release the flexible wire from the motor end, pull up on the tab using a flat blade screwdriver or
equivalent (see figure 8).