Maxima SE V6-3.5L (VQ35) (2002)
Brake Caliper: Service and Repair
Front
Removal
WARNING: Clean brake pads with a vacuum dust collector to minimize the hazard of airborne particles or other materials.
Remove torque member fixing bolts and connecting bolt. It is not necessary to remove connecting bolt except for disassembly or replacement of
caliper assembly. In this case, suspend caliper assembly with wire so as not to stretch brake hose.
Disassembly
WARNING: Do not place your fingers in front of piston.
CAUTION: Do not scratch or score cylinder wall.
1. Push out piston with piston boot with compressed air.
2. Remove piston seal with a suitable tool.