Maxima SE V6-3.5L (VQ35) (2002)
-
Pay attention to alignment of secondary piston slit with valve stopper mounting hole of cylinder body.
2. Install piston stopper pin while piston is pushed into cylinder.
3. Push reservoir tank seals and reservoir tank into cylinder body.
4. Install spring pin.
5. Install stopper cap.
Before installing stopper cap, ensure that claws are bent inward.
Installation
CAUTION:
^
Refill with new brake fluid "DOT 3".
^
Never reuse drained brake fluid.
1. Place master cylinder onto brake booster and secure mounting nuts lightly.
2. Torque mounting nuts.
: 12 - 15 Nm (1.3 - 1.5 kg-m, 9 - 11 ft. lbs.)
3. Fill up reservoir tank with new brake fluid.
4. Plug all ports on master cylinder with fingers to prevent air suction while releasing brake pedal.
5. Have driver depress brake pedal slowly several times until no air comes out of master cylinder.
6. Fit brake lines to master cylinder.