Maxima SE V6-3.5L (VQ35) (2002)
11. Remove rocker covers bolts in the order shown.
INSTALLATION
Installation is in the reverse order of removal.
^
Apply sealant to the areas on the front corners.
^
Use Genuine Silicone RTV Sealant or equivalent.
^
Tighten the rocker cover bolts in two steps in the order shown.
Rocker cover bolts
Step 1 : 0.96 - 2.96 Nm (0.10 - 0.30 kgf-cm, 9 - 26 inch lbs.)
Step 2 : 7.33 - 9.33 Nm (0.75 - 0.95 kgf-cm, 65 - 82 inch lbs.)