Maxima SE V6-3.5L (VQ35) (2002)
Repairs and Inspections Required After a Collision: Service and Repair
Air Bag System
Side Collision
Repairs and Inspections Required After A Collision
SIDE COLLISION
To repair the SRS for a side collision, perform the following steps.
When the side air bag is activated in the side collision:
1. Replace the following components:
-
All parts of front seatback (including front seatback frame) with side air bag module (on the side on which side air bag is activated)
-
Diagnosis sensor unit
-
Satellite sensor (on the side on which side air bag is activated)
2. Check the SRS components and the related parts using the table shown below.
Replace any SRS components and the related parts showing visible signs of damage (dents, cracks, deformation).
3. Conduct self-diagnosis using CONSULT-II or "AIR BAG" warning lamp. Refer to "SRS Operation Check" for details. Ensure entire SRS
operation properly.
See: Air Bag Systems/Testing and Inspection/Component Tests and General Diagnostics
When SRS is not activated in the side collision:
SRS Inspection (For Side Collision)