Maxima SE V6-3.5L (VQ35) (2002)
SRS Inspection (For Side Collision) Part 2
1. Check the SRS components and the related parts using the table as shown.
Replace any SRS components and the related parts showing visible signs of damage (dents, cracks, deformation).
2. Conduct self-diagnosis using CONSULT-II or "AIR BAG" warning lamp. Refer to "SRS Operation Check" for details. Ensure entire SRS
operation properly.
See: Air Bag Systems/Testing and Inspection/Component Tests and General Diagnostics
Frontal Collision
Repairs and Inspections Required After A Collision
FRONTAL COLLISION
To repair the SRS, perform the following steps.
When SRS (except the side air bag) is activated in a collision:
1. Replace the diagnosis sensor unit.
2. Remove the air bag modules (except the side air bag module) and seat belt pre-tensioner assemblies.