Maxima SE V6-3.5L (VQ35) (2002)
Wheel Speed Sensor: Service and Repair
Sensor Rotor
REMOVAL
Front sensor rotor
Rear sensor rotor
1. Remove the drive shaft and rear wheel hub.
2. Remove the sensor rotor using suitable puller, drift and bearing replacer.
INSTALLATION
Install the sensor rotor. For front sensor rotor, use hammer and wooden block. For rear sensor rotor, use suitable drift and press.
-
Always replace sensor rotor with new one.
-
Pay attention to the dimension of rear sensor rotor as show in figure.
12.5 - 13.5 mm (0.492 - 0.531 inch)