nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Bleeding Procedures|Page 12081 > < Bleeding Procedures
Page 1
background image

Power Steering Pump: Service and Repair
Overhaul Procedures

Pre-disassembly Inspection  

Disassemble the power steering oil pump only if the following items are found.

-

Oil leak from any point shown in the figure

-

Deformed or damaged pulley

-

Poor performance

Disassembly  

CAUTION:  
^

Parts which can be disassembled are strictly limited. Never disassemble parts other than those specified.

^

Disassemble in as clean a place as possible.

^

Clean your hands before disassembly.

^

Do not use rags; use nylon cloths or paper towels.

^

Follow the procedures and cautions.

^

When disassembling and reassembling, do not let foreign matter enter or contact the parts.

-

Remove snap ring, then draw drive shaft out. 
Be careful not to drop drive shaft.

-

Remove oil seal.
Be careful not to damage front housing.

Bleeding Procedures|Page 12081 > < Bleeding Procedures