Maxima SE V6-3.5L (VQ35) (2002)
3. Press out bearing outer race.
INSPECTION
Wheel Hub and Knuckle
Check wheel hub and knuckle for cracks by using a magnetic exploration or dyeing test.
Snap Ring
Check snap ring for wear or cracks. Replace if necessary.
ASSEMBLY
-
When removing baffle plate, replace it with a new one.
-
When installing the baffle plate, press new plate so that it is in contact with knuckle wall.
1. Install inner snap ring into groove of knuckle.
2. Press new wheel bearing assembly into knuckle until it contacts snap ring.
Maximum load P: 29 kN (3 ton, 3.3 US ton, 3.0 Imp ton)
CAUTION:
-
Do not press inner race of wheel bearing assembly.
-
Do not apply oil or grease to mating surfaces of wheel bearing outer race and knuckle.
3. Install outer snap ring into groove of knuckle.