Maxima SE 20th V6-3.0L (VQ30DE) (2001)
^
If the Ethernet (IP) Address already matches the address listed in step "E" above, press "Copy" to print the Address for future reference,
turn off CONSULT II and proceed with steps.
^
If the Ethernet (IP) Address does not match the address listed in step "E" above, proceed with step "F" below to correctly set the
CONSULT-II Ethernet (IP) address.
F.
To change, touch the Address number on the CONSULT-II screen (titled "Configure Ethernet"). A numeric keypad will appear (see Figure
6).
G.
Use the keypad to change the Address and Mask to the correct number.
H.
Touch "Save" and then press "Copy" to print the Address for future reference.
I.
Turn off CONSULT-II to allow the new address to be saved in memory, then proceed with step 5.
5.
Start ASIST, then select "INFO. Tool Box" from the main menu screen (see Figure 7).