Maxima Wagon V6-2960cc 3.0L SOHC MFI (VG30E) (1986)
Front Door Hinge: All Technical Service Bulletins
Doors - Popping Noise From Hinges
Reference:
TECHNICAL BULLETIN TS87-073 Date: April 27, 1987
Classification:
BF87-015 Section: Body & Frame Models: 1985 - 1987 Maxima, 1987 Stanza & 1987 Pulsar NX
DOOR HINGE NOISE
This bulletin supersedes Technical Bulletin BF85-011 with improved information. DO NOT use the procedure described in the previous bulletin.
APPLIED MODELS: 1985 - 1987 Maxima, 1987 Stanza and 1987 Pulsar NX
SERVICE INFORMATION
Some vehicles may exhibit a "popping" noise from the door hinges. This condition is most noticeable when the vehicle is driven over rough roads or
during acceleration and deceleration.
Vehicles which exhibit these symptoms may be corrected by installing countermeasure hinge pins. The countermeasure pins have been coated with
molybdenum disulfide. DO NOT remove this coating when installing the pins. Countermeasure hinge pins have been applied to production vehicles
beginning with the Applied VINs below.
APPLIED VINs:
MODEL
BODY
APPLIED VINS
1987
Sedan
From JN1HU11P ( ) HT - 308950
Maxima
Sedan
From JN1HU11P ( ) HX - 860443
Wagon
From JN1HU15P ( ) HX - 060698
1987
Sedan
From JN1HT211 ( ) HT - 044178
Stanza
Hatchback
From JN1HT231 ( ) HT - 005906
1987
Coupe (E16i)
From JN1PN34S ( ) HM - 006068
Pulsar
Coupe (CA16DE)
From JN1EN34S ( ) HM - 001976
PARTS INFORMATION
PART DESCRIPTION
PART NUMBER
QUANTITY REQUIRED
Door Hinge Pin
80406-01L02
2 Per Door
E-Ring (Clip)
00922-50610
2 Per Door