nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Sunroof - Not Closing Properly/Fully/Grinding Noise|Page 5130 > < Tools - Rivnut Installation
Page 1
background image

Sunroof / Moonroof: All Technical Service Bulletins
Sunroof - Not Closing Properly/Fully/Grinding Noise

Reference:

TECHNICAL BULLETIN  TS87-013A       Date:  February 27, 1987

Classification:

BF87-003A       Section:  Body & Frame       Models:  1985-1986 Maxima

SUN ROOF OPERATION, 1985-1986 MAXIMA

This bulletin replaces the original bulletin by combining the part numbers into 1 kit.  Discard the original bulletin.

APPLIED MODEL: 1985-1986 Maxima with sun roof

SERVICE INFORMATION

The sun roof of some 1985-1986 Maxima vehicles may not close properly or fully.  A grinding noise may be heard from the gear/wire drive as the motor
continues to operate in the closed position.  This incident is caused by deflection of the wire guide plate which can allow the gear to slip past the wire
drive.  Frequent "stall-out" or "run-on" of the sun roof motor after the roof is fully closed may contribute to this incident.

To correct this incident, the sun roof motor should be rebuilt as described in the Service Procedure.

PARTS INFORMATION

The following kit is required to rebuild the sunroof motor:

PART DESCRIPTION

PART NUMBER

Sun Roof Motor Rebuild Kit

73685-01F25

The rebuild kit (P/N 73685-01F25) contains the following components:

PART DESCRIPTION

QUANITIY

Motor Washer A

1

Motor Plate B

1

Motor Washer B

1

Motor Pinion

1

Motor Clip

1

Screw

4

The following parts should be ordered as needed (see Service Procedure):

PART DESCRIPTION

PART NUMBER

Motor Packing

73690-01E60

Motor Washer C

73688-01E62

Wire Guide Assembly (Sedan)

73670-41L10

Wire Guide Assembly (Wagon)

73671-W3300

Sunroof - Not Closing Properly/Fully/Grinding Noise|Page 5130 > < Tools - Rivnut Installation