Maxima Wagon V6-2960cc 3.0L SOHC MFI (VG30E) (1986)
Technical Service Bulletin # 96010E
Date: 960517
Recall - Fuel Injectors & Hoses Revision
Reference: NTB96-010e
Date: May 17, 1996
VOLUNTARY SERVICE CAMPAIGN - FUEL INJECTORS AND HOSES
This bulletin contains revised Service Procedures and Parts Information. Use this bulletin as a supplement to NTB96-010a.
APPLIED VEHICLES:
1984-1989 300ZX (Z31)
1985-1988 Maxima (U11)
APPLIED VIN: All
SERVICE INFORMATION
New Service Procedures have been developed for this campaign. These new procedures include:
^
Fuel filter inspection and replacement instructions.
^
A new fuel injector sub-harness for easier installation, better fit, and improved protection. The new harnesses are marked with two tape identification
stripes. The color of the stripes are model and model year specific. Refer to Related Parts information in this bulletin for complete details.
If the injector sub-harness you are installing has only one tape identification stripe, refer to Campaign Bulletin NTB96-010a for complete installation
instructions.
^
An improved sub-harness routing procedure.
^
New sub-harness part numbers.
Begin using these new procedures as soon as you receive this bulletin and the correct parts.
The changes noted on the following pages are the only revisions to the Campaign Service Procedure. Continue to follow all other steps of the Service
Procedure outlined in NTB96-010a.
Service Procedure
Fuel filter inspection/replacement for the 300ZX and Maxima
After installing a fuel pressure gauge and checking the fuel pressure, inspect the fuel filter. If the fuel filter shows any sign of leakage or is not designed
for this specific application, the fuel filter must be replaced. Fuel filter requirements for this specific application are: