Murano AWD V6-3.5L (VQ35) (2003)
^
Use felt cloth tape 68370-4B000 from the Squeak and Rattle Kit.
^
Use four pieces on each of the three supports (see Figure 6).
Lower Anti-Intrusion Foam Block
(Refer to Figure 2 if needed.)
^
Remove the foam block and then re-glue it in place.
^
Use Permatex(R) RTV Silicone Adhesive Sealant-Item # 80050-or equivalent.
^
Use a local source for Permatex(R) products.
Armrest Support
(Refer to Figure 2 if needed.)
^
Apply a piece of foam tape as shown in Figure 8.
^
Use foam tape 76884-71L02 from the Squeak and Rattle Kit.
Door Latch Lever Support
(Refer to Figure 2 if needed.)
^
Apply two (2) pieces of felt cloth tape as shown in Figure 9.
^
Use felt cloth tape 68370-4B000 from the Squeak and Rattle Kit.