Murano AWD V6-3.5L (VQ35) (2003)
Liftgate Window Glass: Service and Repair
BACK DOOR WINDOW GLASS
Removal and Installation
REMOVAL
1. Remove the back door finisher.
2. Remove the rear wiper arm. Refer to "Removal and Installation of Rear Wiper Arm, Adjustment of Wiper Arms Stop Location".
3. Remove the connectors and grounds for the rear window defogger and printed antenna.
-
Remove glass using piano wire or power cutting tool and an inflatable pump bag.
-
If a rear window glass is to be reused, mark the body and the glass with mating marks.
WARNING: When cutting the glass from the vehicle, always wear safety glasses and heavy gloves to help prevent glass splinters from entering
your eyes or cutting your hands.
CAUTION:
-
When a rear window glass is to be reused, do not use a cutting knife or power cutting tool.
-
Be careful not to scratch the glass when removing.
-
Do not set or stand the glass on its edge. Small chips may develop into cracks.