nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Interior Moulding / Trim|Console > < Instruments - Power Outside Mirror(s) Inoperative|Page 15321
Page 1
background image

Carpet: Service and Repair

Removal and Installation

REMOVAL

1. Remove front seat and rear seat cushion.
2. Remove center console upper and console lower. Refer to Instrument Panel.
3. Remove seat belt anchor front and rear. 
4. Remove front and rear kicking plate.
5. Remove front and rear body side welt.
6. Remove center pillar lower garnish.
7. Remove dash side finisher.
8. Remove carpet hook.

9. Remove floor carpet from carpet clip and remove floor carpet.

INSTALLATION

Install in the reverse order of removal.

Interior Moulding / Trim|Console > < Instruments - Power Outside Mirror(s) Inoperative|Page 15321