Murano AWD V6-3.5L (VQ35) (2003)
Power Locks: Service and Repair
Back Door Lock
BACK DOOR LOCK ASSEMBLY
Removal and Installation of Back Door Lock & Opener Actuator
REMOVAL
1. Remove back door finisher.
2. Disconnect the connector and the clip of the back door opener.
3. Remove the mounting bolts.
4. Disconnect the connector of the back door opener actuator and back door opener cable.
5. Remove the mounting bolts, remove back door lock & opener actuator.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
-
After installing, check operation.
-
After installing, perform fitting adjustment. Refer to "Fitting Adjustment".
Removal and Installation of Back Door Outside Handle
REMOVAL
1. Remove back door finisher.
2. Disconnect the back door cable of back door outside handle.
3. Remove the mounting nuts, remove the back door outside handle.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
-
After installing, check operation.
Disassembly and Assembly of Back Door Lock & Opener Actuator
DISASSEMBLY
CAUTION: Be sure to remove or install the actuator with the Back door lock & opener actuator removed.