Murano AWD V6-3.5L (VQ35) (2003)
Power Locks: Service and Repair
Rear Door Lock
REAR DOOR LOCK
REMOVAL
1. Remove the front door finisher.
2. Disconnect the inside handle knob cable and lock knob cable from the back side of the front door finisher.
3. Remove the rear door sash. Refer to "REAR DOOR GLASS AND REGULATOR".
4. Remove the rear door window and rear door screen assembly. Refer to "REAR DOOR GLASS AND REGULATOR".
5. Remove door side grommet, and remove outside handle escutcheon bolt (TORX T30) from grommet hole.
CAUTION: Do not forcibly remove the TORX bolts (T30).
6. While pulling the outside handle, remove outside handle escutcheon.