nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Vehicle - Information/Service Hints|Page 15770 > < Vehicle - Information/Service Hints
Page 2
background image

^

Make sure the tow hook is properly stored in the right rear cargo holder (see Figure 2a). Confirm the gray plastic cover is correctly installed in the
right front grill (see Figure 2b).

Adjustable Brake/Gas Pedal Assembly

When the adjustable pedals are operated for the first time in the upward direction (moved towards the driver), you may hear 4 or 5 clicking noises.

^

This noise is normal for first operation (movement) in the upward direction.

^

After operating (moving) the pedals once, the clicking noise should be gone.

^

Do not attempt to repair or replace any parts for this noise.

Low Tire Pressure Monitor System (if so equipped)

^

This system can be easily identified by the silver-colored metal valve stems installed on each wheel.

^

The Tire Pressure Monitor System (TPMS) is initialized at the vehicle processing center before delivery to your dealership.

^

During PDI, the TPMS must be checked while test driving the vehicle to ensure the tire pressures are displaying properly.

^

Refer to NTB02-010a and NTB02-100a for proper operation and servicing of this system.

SERVICE ITEMS

Rear Passenger Seat Belt Clips

Clips are provided on the "C" pillars to secure the rear outer seat belts (see figure 3).

Vehicle - Information/Service Hints|Page 15770 > < Vehicle - Information/Service Hints