Murano AWD V6-3.5L (VQ35) (2003)
Brake Caliper: Service and Repair
Rear
Removal and Installation of Brake Caliper Assembly
REAR DISC BRAKE
Removal and Installation of Brake Caliper
Assembly
REMOVAL
1. Remove tires from vehicle with power tool.
2. Drain brake fluid. Refer to "Drain and Refill".
3. Remove union bolts and torque member bolts, and remove brake caliper assembly.
4. Remove disc rotor.
INSTALLATION
CAUTION:
-
Refill with new brake fluid "DOT 3".
-
Do not reuse drained brake fluid.
1. Install disc rotor.