Murano AWD V6-3.5L (VQ35) (2003)
Oil Cooler: Service and Repair
OIL COOLER
REMOVAL
1. Remove splash guard (RH).
2. Remove oil filter.
CAUTION:
^
Do not spill engine oil on the drive belt.
3. Disconnect water hoses from oil cooler, while pinching hoses near oil cooler to prevent engine coolant spilling.
CAUTION:
^
Do not spill engine coolant on the drive belts.
4. Remove connector bolt, and remove oil cooler.
INSTALLATION
Install in the reverse order of removal paying attention to the following.