Murano AWD V6-3.5L (VQ35) (2003)
8. Loosen lower oil pan bolts with power tool in reverse order of illustration to remove.
9. Insert a seal cutter (special service tool) between the lower oil pan and the upper oil pan.
CAUTION:
^
Be careful not to damage the mating surface.
^
Do not insert a screwdriver, this will damage the mating surfaces.
10. Slide seal cutter (special service tool) by tapping on the side of the tool with a hammer. Remove lower oil pan.
11. Remove oil strainer.
12. Remove the oil pressure switch.