Murano AWD V6-3.5L (VQ35) (2003)
Refrigerant Oil: Vehicle Damage Warnings
Lubricant Precautions
-
Use only specified lubricant for the HFC-134a (R-134a) A/C system and HFC-134a (R-134a) components. If lubricant other than that specified is
used compressor malfunction is likely to occur.
-
The specified HFC-134a (R-134a) lubricant rapidly absorbs moisture from the atmosphere. The following handling precautions must be observed:
-
When removing refrigerant components from a vehicle immediately cap (seal) the component to minimize the entry of moisture from the
atmosphere.
-
When installing refrigerant components to a vehicle do not remove the caps (unseal) until just before connecting the components. Connect all
refrigerant loop components as quickly as possible to minimize the entry of moisture into system.
-
Only use the specified lubricant from a sealed container. Immediately reseal containers of lubricant. Without proper sealing lubricant will
become moisture saturated and should not be used.
-
Avoid breathing A/C refrigerant and lubricant vapor or mist. Exposure may irritate eyes nose and throat. Remove HFC-134a (R-134a) from the
A/C system using certified service equipment meeting requirements of SAE J2210 HFC-134a (R-134a) recycling equipment or J2209 HFC-134a
(R-134a) recovery equipment. If accidental system discharge occurs ventilate work area before resuming service. Additional health and safety
information may be obtained from refrigerant and lubricant manufacturers.
-
Do not allow lubricant (Nissan A/C System Oil Type S) to come in contact with styrofoam parts. Damage may result.