nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

System Description|Page 16536 > < System Description|Page 16534
Page 3
background image

Engine Oil and Tire Rotation

-

Operating the joystick left/right, replace distance can be set.

-

When journey distance is the same as replace distance, alert is displayed. (SERVICE ALERT setting is ON.)

-

Selected replace distance is 0 - 7,500 miles (0 - 12,000 km) in increments of 500 mile (800 km).

-

Press and hold "TRIP RESET" or "MAINT" switch for 1.5 seconds or longer, reset present journey distance.

-

During driving, cannot change settings.

Tire Pressure

-

Tire pressure signal is received from low tire pressure warning control unit via CAN communication. 

-

Tire pressure is displayed.

-

When FLAT TIRE signal is received from low tire pressure warning control unit, "FLAT TIRE" is displayed.

H,M Switch

-

When "H" or "M" switch is pressed and held for 1.5 seconds or more, mode is changed to clock mode.

-

"hour" and "minute" are flashed.

-

When "H" switch is pressed, "hour" is adjusted.

-

When "M" switch is pressed, "minute" is adjusted.

Adjustable Vehicle Status

SETTING SCREEN

System Description|Page 16536 > < System Description|Page 16534