Murano AWD V6-3.5L (VQ35) (2003)
Body Control Module: All Technical Service Bulletins
Body Control Module - Engine No Start/Key Fob Inop.
Classification:
EC02-024A
Reference:
NTB02-101A
Date:
February 5, 2003
2003 350Z & MURANO; ENGINE WON'T START, KEY FOB INOPERATIVE AFTER BCM REPLACEMENT
This bulletin amends NTB02-101 with the inclusion of an additional Model. Please discard all paper copies of the earlier bulletin.
APPLIED VEHICLES:
2003 350Z (Z33)
2003 Murano (Z50)
SERVICE INFORMATION
If the Body Control Module (BCM) is replaced on any 2003 350Z or Murano, the following procedures must be completed before returning the vehicle
to the customer:
For all vehicle ignition keys:
^
NATS "C/U Initialization,"
^
Key Registration.
For all key fobs:
^
Key Fob ID Code Entry/Key Fob Setup Instructions.
NOTE:
Failure to complete these three procedures will result in an engine no-start incident and inoperative key fob.
Refer to:
^
NTB02-071a for detailed instructions on how to complete C/U Initialization and Key Registration procedures and
^
2003 350Z Service Manual, starting on page BL-75 for ID Code Entry/Key Fob Setup instructions.
^
2003 Murano Service Manual, starting on page BL-121 for ID Code Entry/Key Fob Setup instructions.