nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

A/T, Engine Controls - MIL ON/DTC P0840/Low Power|Page 727 > < A/T, Engine Controls - MIL ON/DTC P0840/Low Power
Page 2
background image

CLAIMS INFORMATION

Submit a Primary Failed Part (PP) line claim using the claims coding table.

Disclaimer

Service Procedure

Step A: Remove and replace the valve body.

1.

A.

Write down all radio station presets.

B.

Disconnect both battery cables (negative cable first).

C.

Wait at least 3 minutes after the battery cables are disconnected.

2.

Remove the CVT dipstick. Raise the vehicle on a hoist.

3.

Remove the undercover from below the front bumper cover (see Figure 1).

4.

Remove the air guide (scoop) see (Figure 2).

A/T, Engine Controls - MIL ON/DTC P0840/Low Power|Page 727 > < A/T, Engine Controls - MIL ON/DTC P0840/Low Power