Murano AWD V6-3.5L (VQ35) (2003)
Generator: All Technical Service Bulletins
Alternator - Revised Removal/Installation Procedure
Classification:
EL03-037
Reference:
NTB04-130
Date:
November 4, 2004
2003-2005 MURANO; REVISED ALTERNATOR REMOVAL AND INSTALLATION PROCEDURE
APPLIED VEHICLES:
2003-2005 Murano (Z50)
IF YOU CONFIRM:
The alternator on an Applied Vehicle needs to be removed for any reason,
ACTION:
Use the Revised Alternator Removal and Installation Procedure in this bulletin.
NOTE:
^
This revised procedure is different then the one currently in the 2003, 2004 and 2005 Murano Service Manuals (ESM's).
^
Please use this procedure until the ESM is updated, or until the Service Manual Amendments (SMA's) become available. Service Manual
Amendments (SMA's) will be provided at a later date.
CLAIMS INFORMATION
REVISED ALTERNATOR REMOVAL and INSTALLATION PROCEDURE
Removal:
1.
Disconnect the negative battery cable.
2.
Remove the engine undercover, using power tools.
3.
Remove the engine right side (passenger side) undercover.
4.
Remove the cooling fan.
^
Refer to section CO in the Service Manual (ESM).
5.
Remove the exhaust manifold cover and three-way converter cover (left side).
^
Refer to section EM in the Service Manual (ESM).
6.
Remove the engine main harness (left side) clip.