Murano AWD V6-3.5L (VQ35) (2003)
/Page-1841012.png)
16.
Place a piece of cardboard against the inside face of the Radiator to protect it when removing the Alternator (see Figure 18).
17.
Remove the Alternator Upper Mounting Bolt (see Figure 19a). Then remove the Alternator by carefully moving it between the Exhaust
Manifold/Catalyst and Radiator towards the Battery tray (see Figure 19b).
Installation
18.
Install the new Alternator in the reverse order of removal, making sure:
^
The "B" Terminal Nut is carefully tightened to 10.1 N-m (1.0 kg-m, 7 ft-lb).
^
The belt tension is properly adjusted (see "Belt Tension Adjustment").
19.
Properly fill and bleed the cooling system.
^
Use essential tool J-45695 "Coolant Refill Tool". Refer to NTB02-011a for more information about this tool.
20.
Re-program all radio station pre-sets.
21.
Return the old Alternator according to the "Campaign Alternator Core Return Information".
