Murano AWD V6-3.5L (VQ35) (2003)
Control Module: Customer Interest
A/T Controls - Reprogram TCM After CVT Replacement
Classification:
AT07-001a
Reference:
NTB07-011a
Date:
February 13, 2007
2003 MURANO; TCM REPROGRAMMING
MUST BE DONE AFTER CVT REPLACEMENT
This bulletin has been amended. Please discard previous copies.
APPLIED VEHICLE:
2003 Murano (Z50)
IF YOU CONFIRM
You need to replace the CVI assembly for any reason.
ACTIONS
Reprogram the TOM. This must be done to ensure the vehicle has the latest program.
IMPORTANT:
Make sure to erase the TCM EEPROM Memory as part of the Reprogramming.
IMPORTANT:
The purpose of "ACTIONS" (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire Service
Procedure as it contains information that is essential to successfully completing this repair.
CLAIMS INFORMATION
Submit a Primary Failed Part (PP) line claim using the claims coding shown.
SERVICE PROCEDURE
Vehicle TCM Reprogramming Overview
^
There are five basic steps:
1.
Download (transfer) reprogramming data from ASIST into CONSULT-II.
2.
"Preparation" steps before reprogramming TOM.
3.
Erase the TCM EEPROM memory.
4.
Reprogram the TCM.
5.
"Wrap-up" after reprogramming is finished.
Step One: Download (Transfer) Reprogramming Data From ASIST Into CONSULT-II