Murano AWD V6-3.5L (VQ35) (2003)
1. As shown in the figure, use a drift to drive the differential side oil seal into the case until it is flush. Refer to dimensions A.
NOTE: The differential side oil seal pulling direction is used as the reference.
Drift to be used
CAUTION:
^
When installing differential side oil seal, apply a coat of NISSAN CVT Fluid NS-2.
^
Do not reuse differential side oil seal.
2. Reinstall any part removed.
CAUTION: If lubricant leak has occurred, after finishing work, check oil level.