Murano AWD V6-3.5L (VQ35) (2003)
Window Seal: Service and Repair
Removal and Installation
FRONT DOOR OUTSIDE MOLDING
Removal
1. Open windows fully.
2. Disengage front door outside molding tab.
3. Reaching from inner side of door use a clip tool to disengage front door outside molding from the tab.
NOTE: Insert clip clamp tool into the door tab, then disengage by pressing in the direction of arrow. (see figure on the right)
INSTALLATION
Install in the reverse order of removal.
REAR DOOR OUTSIDE MOLDING
Removal
1. Open windows fully.
2. Disengage rear door outside molding tab.
3. Reaching from inner side of door use a clip tool to disengage rear door outside molding from the tab.
NOTE: Insert clip clamp tool into the door tab, then disengage by pressing in the direction of arrow. (see figure on the right)
INSTALLATION
Install in the reverse order of removal.