Murano AWD V6-3.5L (VQ35DE) (2009)
Body Control Module: Service and Repair
Body Control System
Exploded View
BCM (BODY CONTROL MODULE)
Exploded View
CAUTION:
Before replacing BCM, perform "READ CONFIGURATION" to save or print current vehicle specification. Refer to See: Body and
Frame/Body Control Systems/Testing and Inspection/Programming and Relearning/Additional Service When Replacing Control Unit
(BCM)/Description.
Removal And Installation
BCM (BODY CONTROL MODULE)
Removal and Installation
CAUTION:
Before replacing BCM, perform "READ CONFIGURATION" to save or print current vehicle specification. Refer to See: Body and
Frame/Body Control Systems/Testing and Inspection/Programming and Relearning/Additional Service When Replacing Control Unit
(BCM)/Description.
REMOVAL
1. Remove combination meter. Refer to See: Instrument Panel, Gauges and Warning Indicators/Service and Repair/Combination Meter.
2. Remove screws.
3. Remove BCM and disconnect the connector.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
-
Be sure to perform "WRITE CONFIGURATION" when replacing BCM.
-
Be sure to perform the system initialization (NATS) when replacing BCM. Refer to See: Body and Frame/Body Control Systems/Testing
and Inspection/Programming and Relearning/Additional Service When Replacing Control Unit (BCM)/Special Repair Requirement.