Murano AWD CrossCabriolet V6-3.5L (VQ35DE) (2011)
^ Each dealer has been mailed one NTB10-125b/ITB10-066b Reprogramming Software DVD free of charge from Clarion.
^ Should you require an additional NTB10-125b/ITB10-066b Reprogramming Software DVD due to loss or damage, it can be ordered free of charge by
contacting Clarion toll free at 1-800-347-8933.
^ Discard the previous version of this Reprogramming Software DVD (NTB10-125/ITB10-066).
CLAIMS INFORMATION
SERVICE PROCEDURE
NOTE:
This procedure will take 10-15 minutes with the ignition ON. Before starting, make sure to attach a battery charger to the vehicle battery and set it to a
low charge rate (trickle charge).
Confirm Navigation Program Version
1. Set the parking brake.
2. Turn the ignition ON and keep the transmission in Park or Neutral.
^ The Navigation start-up screen should display.
^ If the Navigation start-up screen is not displayed: turn the ignition OFF, wait 10 seconds, and then turn the ignition ON again.
3. Wait more than 1 minute.
4. Press the "INFO" button on the switch panel.
5. Select Navigation Version on the display screen.