nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Interior - Improper Cup-Holder Lid Operation|Page 12934 > < Air Bag(s) Arming and Disarming|Service and Repair
Page 1
background image

Technical Service Bulletin # 05-108

Date: 051109

Interior - Improper Cup-Holder Lid Operation

Classification:
BT05-063

Reference:
NTB05-108

Date:
November 9, 2005

2003-2005 MURANO; CUP HOLDER LID - IMPROPER OPERATION

APPLIED VEHICLE(S): 
2003 - 2005 Murano (Z50)

IF YOU CONFIRM

The cup holder lid does not open or partially opens when the button is depressed

ACTION

1.

Inspect the sides of the cup holder lid for contact with the center console during opening and closing. If there's contact, adjust the center console to
eliminate it.

2.

Inspect the rear corners of the cup holder lid for contact with the center console. If there's contact, adjust the center console to eliminate it.

3.

If the cup holder lid still sticks after the above adjustments, trim the pin at the bottom side of the cup holder latch so the pin is flush to the bottom
of the housing.

CLAIMS INFORMATION

IMPORTANT:

The purpose of "ACTIONS" (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire Service
Procedure as it contains information that is essential to successfully completing this repair.

Disclaimer

Service Procedure

Interior - Improper Cup-Holder Lid Operation|Page 12934 > < Air Bag(s) Arming and Disarming|Service and Repair