Murano FWD V6-3.5L (VQ35) (2004)
Brake Caliper: Service and Repair
Front
Removal and Installation of Brake Caliper Assembly
FRONT DISC BRAKE
Removal and Installation of Brake Caliper Assembly
REMOVAL
1. Remove tires from vehicle a with power tool.
2. Drain brake fluid. Refer to "Drain and Refill".
3. Remove union bolts and torque member bolts, and remove brake caliper assembly.
4. Remove disc rotor.
INSTALLATION
CAUTION:
-
Refill with new brake fluid "DOT3"
-
Do not reuse drained brake fluid.
1. Install disc rotor.