Murano FWD V6-3.5L (VQ35) (2004)
Intake Manifold: Service and Repair
Intake Manifold
INTAKE MANIFOLD
Removal and Installation
REMOVAL
1. Release fuel pressure. Refer to "FUEL PRESSURE RELEASE"
2. Remove intake manifold collectors (upper and lower). Refer to "INTAKE MANIFOLD COLLECTOR".
3. Remove fuel tube and fuel injector assembly. Refer to "FUEL INJECTOR AND FUEL TUBE".
4. Loosen mounting nuts and bolts in reverse order as shown in the figure to remove intake manifold with power tool.
5. Remove gaskets.
CAUTION: Cover engine openings to avoid entry of foreign materials.
INSPECTION AFTER REMOVAL
Surface Distortion
^
Check the surface distortion of the intake manifold mating surfaces with a straightedge and a feeler gauge.
Limit: 0.1 mm (0.004 inch)