Murano FWD V6-3.5L (VQ35) (2004)
^
If it exceeds the limit, replace intake manifold.
INSTALLATION
Note the following, and install in the reverse order or removal.
Intake Manifold
^
If stud bolts were removed, install them and tighten to the specified torque below.
10.8 Nm (1.1 kg-m, 8 inch lbs.)
^
Tighten all mounting nuts and bolts to the specified torque in two or more steps in numerical order shown in figure.
1st step: 7.4 Nm (0.8 kg-m, 5 ft. lbs.)
2nd step and after: 29.0 Nm (3.0 kg-m, 21 ft. lbs.)