Murano FWD V6-3.5L (VQ35) (2004)
/Page-615012.png)
13. Install the internal chain guide and tension guide.
14. Install slack guide.
^
Do not over tighten the slack guide mounting bolts. It is normal for a gap to exist under the bolt seats when the mounting bolts are tightened to
specification.
15. Install chain tensioner for slack guide.
^
When installing the chain tensioner, push in the sleeve and keep it pressed in with the stopper pin.
^
Remove any dirt and foreign materials completely from the back and the mounting surfaces of the chain tensioner.
^
After installation, pull out the stopper pin by pressing the slack guide.
16. Reconfirm that the mating marks on the sprockets and the timing chain have not slipped out of alignment.
17. Install new O-rings on the rear timing chain case.
