Murano FWD V6-3.5L (VQ35) (2004)
Combination Switch: Scan Tool Testing and Procedures
Combination Switch Reading Function
For details, refer to "COMBINATION SWITCH READING FUNCTION" in Body Control System. See: Body and Frame/Body Control Systems/Body
Control Module/Description and Operation
CONSULT-II Function
CONSULT-II performs the following functions with combination of data receiving, command and transmission using the CAN communication line from
the BCM.
CONSULT-II BASIC OPERATION
CAUTION: If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending
on control unit which carry out CAN communication.
1. With the ignition switch OFF, connect CONSULT-II and CONSULT-II CONVERTER to the data link connector, then turn ignition switch ON.
2. Touch "START (NISSAN BASED VHCL)".
3. Touch "BCM" on "SELECT SYSTEM" screen.
If "BCM" is not indicated, go to Information Bus, "Precautions When Using CONSULT-II".