Murano FWD V6-3.5L (VQ35) (2004)
Turn Signal Bulb: Service and Repair
Front
Xenon Type
Bulb Replacement
FRONT TURN SIGNAL LAMP
1. Turn lighting switch OFF.
2. Remove air cleaner case (when replacing LH bulb).
3. Remove IPDM E/R (when replacing RH bulb).
4. Turn bulb socket counterclockwise and unlock it.
5. Remove bulb from its socket.
6. Install in reverse order of removal.
Front turn signal lamp: 12 V - 21 W (amber)
Conventional Type
Bulb Replacement
FRONT TURN SIGNAL LAMP
1. Turn lighting switch OFF.
2. Remove fender protector (front).
3. Turn bulb socket counterclockwise and unlock it.
4. Remove bulb from its socket.
5. Install in the reverse order of removal.
Front turn signal lamp: 12 V - 21 W (amber)
CAUTION: After installing bulb, be sure to install plastic cap and bulb socket securely to insure watertightness.