Murano FWD V6-3.5L (VQ35) (2004)
/Page-1022102.png)
ECM/IPDM E/R INTERNAL CIRCUIT INSPECTION
-
Remove ECM and IPDM E/R from vehicle.
-
Check resistance between ECM terminals 94 and 86.
-
Check resistance between IPDM E/R terminals 48 and 49.
IPDM E/R Ignition Relay Circuit Check
IPDM E/R Ignition Relay Circuit Check
Check the following. If no malfunction is found, replace the IPDM E/R.
-
IPDM E/R power supply circuit. Refer to "IPDM E/R Power/Ground Circuit Inspection". See: Power and Ground Distribution/Power Distribution
Module/Testing and Inspection/Symptom Related Diagnostic Procedures/Preliminary Check
-
Ignition power supply circuit. Refer to "IGNITION POWER SUPPLY - IGNITION SW. IN ON AND/OR START ". See: Diagrams/Electrical
Diagrams/Power and Ground Distribution/System Diagram/Power Distribution/PG-POWER-07
Driver Seat Control Unit Circuit Check
Work Flow
Work Flow
