Murano FWD V6-3.5L (VQ35) (2004)
Body Control Module: Reading and Clearing Diagnostic Trouble Codes
CONSULT-II BASIC OPERATION
CAUTION: If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending
on control unit which carry out CAN communication.
1. With the ignition switch OFF, connect CONSULT-II and CONSULT-II CONVERTER to the data link connector, then turn the ignition switch
ON.
2. Touch"START (NISSAN BASED VHCL)".
3. Touch"BCM" on"SELECT SYSTEM" screen.
If "BCM" is not indicated, go to "CONSULT-II Data Link Connector (DLC) Circuit". See: Diagrams/Diagnostic Aids/CONSULT-II Checking
System
4. Select the desired part to be diagnosed on the"SELECT TEST ITEM" screen.