Murano FWD V6-3.5L (VQ35) (2004)
14. Make sure resonators 1 and 3 are connected as shown is Figure 8.
15. Remove covers (cloth / rags) from the openings of the electronic control throttle and airflow meter.
16. Install the air duct assembly back into the vehicle.
17. Reattach the PCV hose.
18. Tighten the band clamps at each end of the air duct assembly.
CAUTION:
^ Make sure all air duct assembly clamps do not interfere with other parts.
^ After completing installation, make sure the air ducts are tight by lightly tugging on each end of each air duct.