Murano FWD V6-3.5L (VQ35) (2004)
Variable Induction Control Solenoid: Testing and Inspection
VIAS CONTROL SOLENOID VALVE
With CONSULT-II
1. Reconnect harness connectors disconnected.
2. Turn ignition switch ON.
3. Perform "VIAS SOL VALVE" in "ACTIVE TEST" mode.
4. Check air passage continuity and operation delay time under the given conditions.
Operation takes less than 1 second.
Without CONSULT-II
Check air passage continuity and operation delay time under the given conditions.
Operation takes less than 1 second.