Murano FWD V6-3.5L (VQ35DE) (2006)
Carpet: Service and Repair
FLOOR TRIM
Removal and Installation
REMOVAL
1. Remove front seat and rear seat cushion.
2. Remove center console upper and console lower.
3. Remove seat belt anchor front and rear.
4. Remove front and rear kicking plate.
5. Remove front and rear body side welt.
6. Remove center pillar lower garnish.
7. Remove dash side finisher.
8. Cut floor trim tunnel upper side (Section A) using cutter knife.
9. Remove carpet hook.
10. Remove floor carpet from fixing clip and remove floor carpet.
INSTALLATION
Install in the reverse order of removal.