Murano FWD V6-3.5L (VQ35DE) (2006)
Seat Bladder: All Technical Service Bulletins
Interior - Driver's Seat Lumbar Support Inoperative
Classification:
BT05-064a
Reference:
NTB05-109a
Date:
July 2O, 2007
2003-2007 MURANO; DRIVER SEAT LUMBAR SUPPORT NO OR IMPROPER OPERATION
The Applied Vehicles and Parts Information sections of this bulletin have been amended.
No other changes have been made.
APPLIED VEHICLE:
2003 - 2007 Murano (Z50)
IF YOU CONFIRM
The driver seat lumbar support will not operate, or does not operate correctly, NOTE: The customer may report that the lumbar support is "weak", or that
it does not give enough support or pressure.
ACTION
Replace the lumbar support assembly with the new one listed in the Parts Information. NOTE: DO NOT replace the entire seat back assembly for this
incident.
PARTS INFORMATION
CLAIMS INFORMATION
Submit Primary Failed Part (PP) line claim using the claims coding shown.
IMPORTANT:
The purpose of "ACTIONS" (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire Service
Procedure as it contains information that is essential to successfully completing this repair.
SERVICE PROCEDURE
1.
Remove the seat back finisher as follows: