Murano FWD V6-3.5L (VQ35DE) (2006)
Image Symbols
Disassembly and Assembly of Brake Caliper Assembly
DISASSEMBLY
1. Remove slide pin bolt, and then remove the pads, shims, shim covers, and pad retainers from torque member and cylinder.
2. Remove sliding pin boots from torque member.
3. As shown in the figure, using a flat-bladed screwdriver, remove retaining ring from cylinder body.
4. Place a wooden block as shown in the figure, and blow air from union bolt mounting hole to remove pistons and piston boots.
CAUTION: Do not get your fingers caught in the piston.
5. Using a flat-bladed screwdriver, remove piston seals from cylinder body.