Murano FWD V6-3.5L (VQ35DE) (2006)
/Page-615003.png)
7. Remove the following parts:
^
Vacuum hose
^
PCV hose
^
Power steering hose bracket
^
Intake manifold collector support
^
Harness bracket
8. Disconnect EVAP hoses and harness connector from EVAP canister purge volume control solenoid valve.
9. Remove EVAP canister purge volume control solenoid valve.
10. Remove VIAS control solenoid valve and vacuum tank.
^
Add mating marks as necessary for easier installation.
11. Loosen mounting nuts and bolts in reverse order as shown in the figure with power tool, and remove intake manifold collector (upper and lower)
assembly and gasket.
CAUTION: Cover engine openings to avoid entry of foreign materials.
12. Loosen mounting bolts in reverse order as shown in the figure to remove intake manifold collector (upper) from intake manifold collector (lower)
with power tool.
13. Loosen mounting bolts in reverse order as shown in the figure to remove power valve from intake manifold collector (lower).
INSPECTION AFTER REMOVAL
Surface Distortion
