Murano FWD V6-3.5L (VQ35DE) (2006)
CAUTION:
^
Do not use a screwdriver or something similar.
^
After removal, handle front timing chain case carefully so it does not tilt, cant, or warp under a load.
26. Remove oil pan gasket (front).
27. Remove O-rings from rear timing chain case.
28. Remove water pump cover and chain tensioner cover from front timing chain case, if necessary.
^
Use the seal cutter [SST: KV10111100 (J37228)] to cut liquid gasket for removal.
29. Remove front oil seal from front timing chain case using a suitable tool.
^
Use a screwdriver for removal.
CAUTION: Be careful not to damage front timing chain case.
30. Remove timing chain and related parts.
31. Use a scraper to remove all traces of old liquid gasket from front and rear timing chain cases and oil pan (upper), and liquid gasket mating
surfaces.
CAUTION: Be careful not to allow gasket fragments to enter oil pan.