Murano FWD V6-3.5L (VQ35DE) (2006)
Compass: Adjustments
Zone Variation Change Procedure
The difference between magnetic north and geographical north is known as variance. In some areas, this difference can sometimes be great enough to
cause false compass reading.
Follow these instructions to set the variance for the particular location if this happens:
1. Push "COMP" switch for more than 3 seconds. The current zone number will appear in the display.
2. Find the current location and variance one number on the zone variation chart.
3. Push "COMP" switch until the new zone number appears in the display. After stopping pushing the switch in, the display will show a compass
direction within a few seconds.
Correction Functions of the Compass Display
AUTOMATIC CORRECTION
The compass display is equipped with automatic correction function. If the direction is not shown correctly, perform manual correction procedure set out
below.
MANUAL CORRECTION PROCEDURE
When the display reads "C" or "CAL", calibrate the compass by driving the vehicle in 3 complete circles at less than 8 km/h (5 MPH).
The compass can be calibrated by driving the vehicle on everyday route. The compass will be calibrated once it has tracked 3 complete circles.
In places where the terrestrial magnetism is extremely disturbed, the initial correction procedure may start automatically.